TCT Coated
Ciswerk TCT Coated Cold Saw Blades for Stainless Steel
Ciswerk TCT coated cold saw blades are matched to stainless steel applications where heat control, edge stability and proper feed range are critical.
Best for
- ✓ 201 stainless steel
- ✓ 304 stainless steel
- ✓ 316 stainless steel
- ✓ Stainless steel bar and tube
Not ideal for
- — Carbon steel jobs better matched to cermet
- — High vibration or poor coolant condition
Technical advantages
Carbide tipped durability
Coating for stainless applications
Stable edge wear
Precision cutting
Custom bore and teeth
Reference specification table
Typical reference only. Final parameters depend on material, machine rigidity, coolant and cutting conditions.
| OD | Kerf | Plate | Bore | Teeth | Pin holes | Tip | Coating | Geometry | Material | Machine | Remarks |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 250 / 285 | 2.0 | 1.7 | 32 | 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 300 | 2.0 | 1.7 | 32 | 50 / 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 315 | 2.25 | 2.0 | 32 | 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 330 | 2.25 | 2.0 | 32 | 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 360 | 2.6 | 2.25 | 40 | 40 / 50 / 60 / 72 / 80 / 100 / 120 / 140 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 380 | 2.6 | 2.25 | 40 | 40 / 50 / 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 400 | 2.6 | 2.25 | 50 | 50 / 60 / 72 / 80 / 100 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 425 | 2.7 | 2.25 | 50 | 50 / 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 460 | 2.7 | 2.25 | 50 | 40 / 50 / 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 485 | 2.7 | 2.25 | 50 | 40 / 50 / 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 520 | 2.7 | 2.25 | 50 | 48 / 54 / 60 / 80 / 100 / 120 / 140 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 630 | 3.4 | 2.7 | 80 | 50 / 60 / 72 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 750 | 3.8 | 3.0 | 80 | 50 / 60 / 70 / 80 / 100 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
| 840 | 4.0 | 3.2 | 80 | 40 / 50 / 60 / 80 / 100 / 120 | Custom on request | Tungsten carbide | Stainless cutting coating | Matched to material and wall thickness | 201 / 304 / 316 stainless steel | Carbide cold saw cut-off machine | Typical V 50-70 m/min; Sz 0.035-0.05 mm. 304 stainless reference life about 20 m2. |
Product family
Ciswerk TCT Coated Cold Saw Blades
For 201, 304 and 316 stainless steel cutting.
View detailsApplication matching
Related technical articles
FAQ
What information do you need for a TCT coated cold saw blade quotation?
Please send material grade, workpiece dimensions, machine type, current blade size, main problem and monthly usage.
Can CISWERK make custom bore, pinholes and tooth counts?
Yes. Diameter, bore, kerf, tooth count, pinhole pattern and marking can be reviewed for OEM, replacement and distributor projects.
Are the cutting parameters guaranteed?
Published values are reference ranges. Final settings depend on machine rigidity, coolant, clamping, material grade and line condition.
Can we test samples before bulk order?
Yes. The sample testing workflow validates blade life, burr level, tooth condition, surface finish and cost per cut before repeat orders.
Do you support OEM or private label?
OEM packaging, logo marking and distributor support can be discussed after application, drawing and volume review.
RFQ
Send your material, machine and current blade size.
We will recommend a blade for testing and mark technical parameters as reference only.