Coated Cermet
Ciswerk Coated Cermet Cold Saw Blades for Medium and High Carbon Steel
Ciswerk coated cermet blades are built for more demanding carbon steel cutting, including higher carbon grades where coating stability and wear resistance are important.
Best for
- ✓ Medium carbon steel
- ✓ High carbon steel
- ✓ Bearing steel starting applications
- ✓ Stable automatic cutting
Not ideal for
- — Incorrect speed range
- — Dry cutting without suitable lubrication
- — Loose fixtures
Technical advantages
Coated wear resistance
Stable cutting life
Clean surface
Good precision
Custom dimensions
Reference specification table
Typical reference only. Final parameters depend on material, machine rigidity, coolant and cutting conditions.
| OD | Kerf | Plate | Bore | Teeth | Pin holes | Tip | Coating | Geometry | Material | Machine | Remarks |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 250 / 285 | 2.0 | 1.7 | 32 | 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 300 | 2.0 | 1.7 | 32 | 50 / 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 315 | 2.25 | 2.0 | 32 | 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 330 | 2.25 | 2.0 | 32 | 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 360 | 2.6 | 2.25 | 40 | 40 / 50 / 60 / 72 / 80 / 100 / 120 / 140 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 380 | 2.6 | 2.25 | 40 | 40 / 50 / 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 400 | 2.6 | 2.25 | 50 | 50 / 60 / 72 / 80 / 100 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 425 | 2.7 | 2.25 | 50 | 50 / 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 460 | 2.7 | 2.25 | 50 | 40 / 50 / 54 / 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 485 | 2.7 | 2.25 | 50 | 40 / 50 / 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 520 | 2.7 | 2.25 | 50 | 48 / 54 / 60 / 80 / 100 / 120 / 140 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 630 | 3.4 | 2.7 | 80 | 50 / 60 / 72 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 750 | 3.8 | 3.0 | 80 | 50 / 60 / 70 / 80 / 100 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
| 840 | 4.0 | 3.2 | 80 | 40 / 50 / 60 / 80 / 100 / 120 | Custom on request | Cermet | Performance coating | Matched to material and wall thickness | Medium and high carbon steel | Carbide cold saw cut-off machine | Typical V 90-130 m/min; Sz 0.05-0.10 mm. Reference life: GCr15 about 30 m2; 55# steel about 50 m2. |
Product family
Ciswerk Coated Cermet Cold Saw Blades
For medium and high carbon steel with longer blade life.
View detailsApplication matching
Related technical articles
FAQ
What information do you need for a coated cermet cold saw blade quotation?
Please send material grade, workpiece dimensions, machine type, current blade size, main problem and monthly usage.
Can CISWERK make custom bore, pinholes and tooth counts?
Yes. Diameter, bore, kerf, tooth count, pinhole pattern and marking can be reviewed for OEM, replacement and distributor projects.
Are the cutting parameters guaranteed?
Published values are reference ranges. Final settings depend on machine rigidity, coolant, clamping, material grade and line condition.
Can we test samples before bulk order?
Yes. The sample testing workflow validates blade life, burr level, tooth condition, surface finish and cost per cut before repeat orders.
Do you support OEM or private label?
OEM packaging, logo marking and distributor support can be discussed after application, drawing and volume review.
RFQ
Send your material, machine and current blade size.
We will recommend a blade for testing and mark technical parameters as reference only.