K+ Orbital Saw
Ciswerk K+ Series Orbital Tube Cutting Saws
Ciswerk K+ series orbital blades are engineered for orbital tube cutting systems, especially where large tube diameter, line stability and tube end quality matter.
Best for
- ✓ Online orbital tube cut-off
- ✓ Large tube and pipe
- ✓ High-speed tube lines
- ✓ Track-type orbital systems
Not ideal for
- — Poor carriage stability
- — Unknown pipe OD and wall thickness
- — Severe runout
Technical advantages
Reference specification table
Typical reference only. Final parameters depend on material, machine rigidity, coolant and cutting conditions.
| OD | Kerf | Plate | Bore | Teeth | Pin holes | Tip | Coating | Geometry | Material | Machine | Remarks |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 250 | 3.2 | 2.5 | 45 / 50 | 64 / 72 / 80 | Custom on request | Tungsten carbide | Optional PVD | Matched to material and wall thickness | Steel tube and pipe | Online orbital tube cutting system | Typical V 300-380 m/min; Sz 0.08-0.15 mm. Reference life 5-8 m2. |
| 300 | 3.2 | 2.5 | 80 | 52 / 64 / 72 | Custom on request | Tungsten carbide | Optional PVD | Matched to material and wall thickness | Steel tube and pipe | Online orbital tube cutting system | Typical V 300-380 m/min; Sz 0.08-0.15 mm. Reference life 5-8 m2. |
| 355 | 4.0 | 3.2 | 45 / 80 | 64 / 72 / 84 | Custom on request | Tungsten carbide | Optional PVD | Matched to material and wall thickness | Steel tube and pipe | Online orbital tube cutting system | Typical V 300-380 m/min; Sz 0.08-0.15 mm. Reference life 5-8 m2. |
| 380 / 400 | 4.0 | 3.2 | 115 | 52 / 64 / 72 | Custom on request | Tungsten carbide | Optional PVD | Matched to material and wall thickness | Steel tube and pipe | Online orbital tube cutting system | Typical V 300-380 m/min; Sz 0.08-0.15 mm. Reference life 5-8 m2. |
Product family
Ciswerk K+ Series Orbital Tube Cutting Saws
For online orbital cut-off of steel tubes and pipe.
View detailsApplication matching
Related technical articles
FAQ
What information do you need for a K+ series orbital tube cutting saw quotation?
Please send material grade, workpiece dimensions, machine type, current blade size, main problem and monthly usage.
Can CISWERK make custom bore, pinholes and tooth counts?
Yes. Diameter, bore, kerf, tooth count, pinhole pattern and marking can be reviewed for OEM, replacement and distributor projects.
Are the cutting parameters guaranteed?
Published values are reference ranges. Final settings depend on machine rigidity, coolant, clamping, material grade and line condition.
Can we test samples before bulk order?
Yes. The sample testing workflow validates blade life, burr level, tooth condition, surface finish and cost per cut before repeat orders.
Do you support OEM or private label?
OEM packaging, logo marking and distributor support can be discussed after application, drawing and volume review.
RFQ
Send your material, machine and current blade size.
We will recommend a blade for testing and mark technical parameters as reference only.