PCD Diamond
Ciswerk PCD Diamond Tipped Saw Blades for Aluminum and Wood
Ciswerk PCD diamond tipped saw blades are selected for applications that require smooth cutting, low burrs and very long service life in aluminum and wood profile cutting.
Best for
- ✓ Aluminum profile cutting
- ✓ Wood profile cutting
- ✓ Round bar and profile applications
- ✓ Low-burr finish requirements
Not ideal for
- — Ferrous steel cutting
- — Interrupted cuts outside design condition
Technical advantages
Very long service life
Smooth cutting surface
Low burrs
Low noise
PCD tip solution
Reference specification table
Typical reference only. Final parameters depend on material, machine rigidity, coolant and cutting conditions.
| OD | Kerf | Plate | Bore | Teeth | Pin holes | Tip | Coating | Geometry | Material | Machine | Remarks |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 200 | 3.0 | 2.2 | 25.4 / 30 | 24 / 36 / 48 / 60 / 80 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 255 | 3.0 | 2.2 | 25.4 / 30 | 24 / 36 / 48 / 60 / 80 / 100 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 300 | 3.2 | 2.2 | 30 | 28 / 36 / 48 / 60 / 72 / 80 / 96 / 100 / 120 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 350 | 3.5 / 4.0 / 4.4 | 2.5 / 3.2 | 30 / 60 | 28 / 36 / 48 / 60 / 72 / 80 / 96 / 100 / 120 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 380 | 4.4 | 3.2 | 60 | 72 / 84 / 96 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 400 | 4.4 | 3.2 | 60 / 75 | 72 / 84 / 96 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 450 | 4.8 | 3.5 | 60 / 75 | 72 / 84 / 96 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 300 | 3.0 | 2.5 | 25.4 / 30 | 60 / 80 / 100 / 120 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 350 | 3.0 | 2.5 | 25.4 / 30 | 60 / 80 / 100 / 120 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 400 | 3.2 | 2.5 | 25.4 / 30 | 60 / 80 / 100 / 120 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 450 | 4.0 | 3.2 | 25.4 / 30 | 60 / 80 / 100 / 120 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 500 | 4.4 | 3.5 | 30 | 60 / 80 / 100 / 120 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 550 | 4.4 / 5.0 | 3.5 / 4.0 | 30 / 38 | 60 / 80 / 100 / 120 / 144 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 600 | 5.5 | 4.8 | 30 / 38 | 60 / 80 / 100 / 120 / 144 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 700 | 6.0 | 5.0 | 30 | 60 / 80 / 100 / 120 / 144 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 750 | 6.5 | 5.5 | 50 | 60 / 80 / 100 / 120 / 144 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
| 800 | 7.0 | 6.0 | 50 | 60 / 80 / 100 / 120 / 144 | Custom on request | PCD diamond | Not required / application dependent | Matched to material and wall thickness | Aluminum and wood profiles | Profile cutting machine / non-ferrous cutting machine | PCD life can be many times higher than conventional TCT in suitable non-ferrous and wood applications. |
Product family
Ciswerk PCD Diamond Tipped Saw Blades
For aluminum, wood profiles and very long-life clean cutting.
View detailsApplication matching
Related technical articles
FAQ
What information do you need for a PCD diamond tipped saw blade quotation?
Please send material grade, workpiece dimensions, machine type, current blade size, main problem and monthly usage.
Can CISWERK make custom bore, pinholes and tooth counts?
Yes. Diameter, bore, kerf, tooth count, pinhole pattern and marking can be reviewed for OEM, replacement and distributor projects.
Are the cutting parameters guaranteed?
Published values are reference ranges. Final settings depend on machine rigidity, coolant, clamping, material grade and line condition.
Can we test samples before bulk order?
Yes. The sample testing workflow validates blade life, burr level, tooth condition, surface finish and cost per cut before repeat orders.
Do you support OEM or private label?
OEM packaging, logo marking and distributor support can be discussed after application, drawing and volume review.
RFQ
Send your material, machine and current blade size.
We will recommend a blade for testing and mark technical parameters as reference only.